[Forgot Password]
Login  Register Subscribe

24002

 
 

127027

 
 

102010

 
 

909

 
 

81380

 
 

133

Paid content will be excluded from the download.


Download | Alert*


CCE-34776-5
Prevent the computer from joining a homegroup By default, users can add their computer to a homegroup on a home network. If you enable this policy setting, a user on this computer will not be able to add this computer to a homegroup. This setting does not affect other network sharing features. I ...

CCE-33166-0
Prevent memory overwrite on restart This policy setting controls computer restart performance at the risk of exposing BitLocker secrets. This policy setting is applied when you turn on BitLocker. BitLocker secrets include key material used to encrypt data. This policy setting applies only when BitL ...

CCE-33976-2
Network access: Remotely accessible registry paths This policy setting determines which registry paths will be accessible after referencing the WinReg key to determine access permissions to the paths. Note: This setting does not exist in Windows XP. There was a setting with that name in Windows XP, ...

CCE-33143-9
Turn off Internet download for Web publishing and online ordering wizards This policy setting controls whether Windows will download a list of providers for the Web publishing and online ordering wizards.

CCE-35707-9
Validate smart card certificate usage rule compliance This policy setting allows you to associate an object identifier from a smart card certificate to a BitLocker-protected drive. This policy setting is applied when you turn on BitLocker. The object identifier is specified in the enhanced key u ...

CCE-33046-4
Audit: Shut down system immediately if unable to log security audits This policy setting determines whether the system shuts down if it is unable to log Security events. It is a requirement for Trusted Computer System Evaluation Criteria (TCSEC)-C2 and Common Criteria certification to prevent audit ...

CCE-35236-9
Set time limit for disconnected sessions This policy setting allows you to configure a time limit for disconnected Remote Desktop Services sessions. You can use this policy setting to specify the maximum amount of time that a disconnected session remains active on the server. By default, Remote ...

CCE-35531-3
Audit Policy: Account Management: Distribution Group Management This subcategory reports each event of distribution group management, such as when a distribution group is created, changed, or deleted or when a member is added to or removed from a distribution group. If you enable this Audit policy ...

CCE-35706-1
Deny write access to fixed drives not protected by BitLocker This policy setting determines whether BitLocker protection is required for fixed data drives to be writable on a computer. This policy setting is applied when you turn on BitLocker. If you enable this policy setting, all fixed data dr ...

CCE-35017-3
Set time limit for active but idle Remote Desktop Services sessions This policy setting allows you to specify the maximum amount of time that an active Remote Desktop Services session can be idle (without user input) before it is automatically disconnected. If you enable this policy setting, you ...

CCE-32933-4
Audit Policy: Object Access: Certification Services This subcategory reports when Certification Services operations are performed. Events for this subcategory include: ? 4868: The certificate manager denied a pending certificate request. ? 4869: Certificate Services received a resubmitted certific ...

CCE-33167-8
Configure use of hardware-based encryption for operating system drives This policy setting allows you to manage BitLocker?s use of hardware-based encryption on operating system drives and specify which encryption algorithms it can use with hardware-based encryption. Using hardware-based encryption ...

CCE-34788-0
Always install with elevated privileges This policy setting directs Windows Installer to use elevated permissions when it installs any program on the system. If you enable this policy setting, privileges are extended to all programs. These privileges are usually reserved for programs that have b ...

CCE-33045-6
Audit: Audit the use of Backup and Restore privilege This policy setting determines whether to audit the use of all user privileges, including Backup and Restore, when the Audit privilege use setting is in effect. If you enable both policies, an audit event will be generated for every file that is ...

CCE-35410-0
Network security: Allow LocalSystem NULL session fallback Allow NTLM to fall back to NULL session when used with LocalSystem. The default is TRUE up to Windows Vista and FALSE in Windows 7.

CCE-34898-7
Interactive logon: Do not display last user name This policy setting determines whether the account name of the last user to log on to the client computers in your organization will be displayed in each computer's respective Windows logon screen. Enable this policy setting to prevent intruders from ...

CCE-35807-7
Turn off Automatic Download and Install of updates Enables or disables the automatic download and installation of app updates. If you enable this setting, the automatic download and installation of app updates is turned off. If you disable this setting, the automatic download and installation ...

CCE-32936-7
Audit Policy: System: Other System Events This subcategory reports on other system events. Events for this subcategory include: ? 5024 : The Windows Firewall Service has started successfully. ? 5025 : The Windows Firewall Service has been stopped. ? 5027 : The Windows Firewall Service was unable ...

CCE-35540-4
Configure use of hardware-based encryption for removable data drives This policy setting allows you to manage BitLocker?s use of hardware-based encryption on removable data drives and specify which encryption algorithms it can use with hardware-based encryption. Using hardware-based encryption can ...

CCE-35005-8
Shutdown: Clear virtual memory pagefile This policy setting determines whether the virtual memory pagefile is cleared when the system is shut down. When this policy setting is enabled, the system pagefile is cleared each time that the system shuts down properly. If you enable this security setting, ...

CCE-34622-1
MSS: (TcpMaxDataRetransmissions IPv6) How many times unacknowledged data is retransmitted (3 recommended, 5 is default) The registry value entry TCPMaxDataRetransmissions for IPv6 was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip6 \Parameters\ registry ...

CCE-34986-0
Domain member: Disable machine account password changes This policy setting determines whether a domain member can periodically change its computer account password. If you enable this policy setting, the domain member will be prevented from changing its computer account password. If you disable th ...

CCE-33035-7
Allow log on through Remote Desktop Services This policy setting determines which users or groups have the right to log on as a Terminal Services client. Remote desktop users require this user right. If your organization uses Remote Assistance as part of its help desk strategy, create a group and a ...

CCE-35708-7
Allow network unlock at startup This policy setting controls whether a BitLocker-protected computer that is connected to a trusted wired Local Area Network (LAN) and joined to a domain can create and use Network Key Protectors on TPM-enabled computers to automatically unlock the operating system dr ...

CCE-33100-9
Allow enhanced PINs for startup This policy setting allows you to configure whether or not enhanced startup PINs are used with BitLocker. Enhanced startup PINs permit the use of characters including uppercase and lowercase letters, symbols, numbers, and spaces. This policy setting is applied whe ...

CCE-35431-6
Allow user control over installs This policy setting permits users to change installation options that typically are available only to system administrators. If you enable this policy setting, some of the security features of Windows Installer are bypassed. It permits installations to complete t ...

CCE-33512-5
Devices: Restrict CD-ROM access to locally logged-on user only This policy setting determines whether a CD-ROM is accessible to both local and remote users simultaneously. If you enable this policy setting, only the interactively logged-on user is allowed to access removable CD-ROM media. When this ...

CCE-34623-9
MSS: (TcpMaxDataRetransmissions) How many times unacknowledged data is retransmitted (3 recommended, 5 is default) The registry value entry TCPMaxDataRetransmissions was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip \Parameters\ registry key. The entry ...

CCE-34022-4
MSS: (SafeDllSearchMode) Enable Safe DLL search mode (recommended) The registry value entry SafeDllSearchMode was added to the template file in the HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\Control\Session Manager\ registry key. The entry appears as MSS: (SafeDllSearchMode) Enable Safe DLL searc ...

CCE-35809-3
Turn off the offer to update to the latest version of Windows Enables or disables the Store offer to update to the latest version of Windows. If you enable this setting, the Store application will not offer updates to the latest version of Windows. If you disable or do not configure this sett ...

CCE-34757-5
Recovery console: Allow floppy copy and access to all drives and all folders This policy setting makes the Recovery Console SET command available, which allows you to set the following recovery console environment variables: - AllowWildCards. Enables wildcard support for some commands (such as the ...

CCE-33101-7
Choose how BitLocker-protected operating system drives can be recovered This policy setting allows you to control how BitLocker-protected operating system drives are recovered in the absence of the required startup key information. This policy setting is applied when you turn on BitLocker. The ' ...

CCE-35293-0
Deny log on locally This security setting determines which users are prevented from logging on at the computer. This policy setting supersedes the Allow log on locally policy setting if an account is subject to both policies.Important:If you apply this security policy to the Everyone group, no one ...

CCE-35523-0
Audit Policy: Privilege Use: Non Sensitive Privilege Use This subcategory reports when a user account or service uses a non-sensitive privilege. A non-sensitive privilege includes the following user rights: Access Credential Manager as a trusted caller, Access this computer from the network, Add w ...

CCE-35459-7
User Account Control: Virtualize file and registry write failures to per-user locations This policy setting controls whether application write failures are redirected to defined registry and file system locations. This policy setting mitigates applications that run as administrator and write run-ti ...

CCE-35338-3
User Account Control: Admin Approval Mode for the Built-in Administrator account This policy setting controls the behavior of Admin Approval Mode for the built-in Administrator account. The options are: - Enabled: The built-in Administrator account uses Admin Approval Mode. By default, any operat ...

CCE-33080-3
Configure use of hardware-based encryption for fixed data drives This policy setting allows you to manage BitLocker?s use of hardware-based encryption on fixed data drives and specify which encryption algorithms it can use with hardware-based encryption. Using hardware-based encryption can improve ...

CCE-34988-6
Interactive logon: Smart card removal behavior This policy setting determines what happens when the smart card for a logged-on user is removed from the smart card reader.

CCE-33037-3
Audit Policy: Account Logon: Other Account Logon Events This subcategory reports the events that occur in response to credentials submitted for a user account logon request that do not relate to credential validation or Kerberos tickets. These events occur on the computer that is authoritative for ...

CCE-32952-4
Choose drive encryption method and cipher strength This policy setting allows you to configure the algorithm and cipher strength used by BitLocker Drive Encryption. This policy setting is applied when you turn on BitLocker. Changing the encryption method has no effect if the drive is already encryp ...

CCE-33102-5
Configure use of smart cards on fixed data drives This policy setting allows you to specify whether smart cards can be used to authenticate user access to the BitLocker-protected fixed data drives on a computer. If you enable this policy setting smart cards can be used to authenticate user acces ...

CCE-35786-3
Network Security: Configure encryption types allowed for Kerberos This policy setting allows you to set the encryption types that Kerberos is allowed to use. This policy is supported on at least Windows 7 or Windows Server 2008 R2.

CCE-34614-8
MSS: (PerformRouterDiscovery) Allow IRDP to detect and configure Default Gateway addresses (could lead to DoS) The registry value entry PerformRouterDiscovery was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\ registry key. The entry appears ...

CCE-35108-0
Network security: Minimum session security for NTLM SSP based (including secure RPC) servers This policy setting determines which behaviors are allowed for applications using the NTLM Security Support Provider (SSP). The SSP Interface (SSPI) is used by applications that need authentication services ...

CCE-33787-3
Deny log on through Remote Desktop Services This policy setting determines whether users can log on as Terminal Services clients. After the baseline member server is joined to a domain environment, there is no need to use local accounts to access the server from the network. Domain accounts can acc ...

CCE-35501-6
Audit Policy: DS Access: Detailed Directory Service Replication This subcategory reports detailed information about the information replicating between domain controllers. These events can be very high in volume. Events for this subcategory include: ? 4928: An Active Directory replica source naming ...

CCE-35532-1
Audit Policy: Policy Change: MPSSVC Rule-Level Policy Change This subcategory reports changes in policy rules used by the Microsoft Protection Service (MPSSVC.exe). This service is used by Windows Firewall and by Microsoft OneCare. Events for this subcategory include: ? 4944: The following policy w ...

CCE-33740-2
Allow Remote Shell Access This policy setting allows you to manage configuration of remote access to all supported shells to execute scripts and commands.

CCE-35400-1
Always install with elevated privileges Directs Windows Installer to use system permissions when it installs any program on the system. This setting extends elevated privileges to all programs. These privileges are usually reserved for programs that have been assigned to the user (offered on the d ...

CCE-35194-0
Enumerate administrator accounts on elevation By default, all administrator accounts are displayed when you attempt to elevate a running application.

CCE-33103-3
Require additional authentication at startup This policy setting allows you to configure whether BitLocker requires additional authentication each time the computer starts and whether you are using BitLocker with or without a Trusted Platform Module (TPM). This policy setting is applied when you tu ...

CCE-33642-0
Prevent changing screen saver Prevents the Screen Saver dialog from opening in the Personalization or Display Control Panel. This setting prevents users from using Control Panel to add, configure, or change the screen saver on the computer. It does not prevent a screen saver from running.

CCE-35411-8
Network Security: Allow PKU2U authentication requests to this computer to use online identities Windows 7 and Windows Server 2008 R2 introduce an extension to the Negotiate authentication package, Spnego.dll. In previous versions of Windows, Negotiate decides whether to use Kerberos or NTLM for aut ...

CCE-33082-9
Configure TPM platform validation profile for native UEFI firmware configurations This policy setting allows you to configure how the computer's Trusted Platform Module (TPM) security hardware secures the BitLocker encryption key. This policy setting does not apply if the computer does not have a c ...

CCE-34021-6
Impersonate a client after authentication The policy setting allows programs that run on behalf of a user to impersonate that user (or another specified account) so that they can act on behalf of the user. If this user right is required for this kind of impersonation, an unauthorized user will not ...

CCE-34253-5
Allow access to BitLocker-protected fixed data drives from earlier versions of Windows This policy setting configures whether or not fixed data drives formatted with the FAT file system can be unlocked and viewed on computers running Windows Server 2008, Windows Vista, Windows XP with Service Pack ...

CCE-35228-6
Recovery console: Allow automatic administrative logon The recovery console is a command-line environment that is used to recover from system problems. If you enable this policy setting, the administrator account is automatically logged on to the recovery console when it is invoked during startup.

CCE-35631-1
Turn off the Windows Messenger Customer Experience Improvement Program This policy setting specifies whether Windows Messenger collects anonymous information about how Windows Messenger software and service is used. With the Customer Experience Improvement program, users can allow Microsoft to c ...

CCE-33104-1
Use enhanced Boot Configuration Data validation profile This policy setting allows you to choose specific Boot Configuration Data (BCD) settings to verify during platform validation. If you enable this policy setting, you will be able to add additional settings, remove the default settings, or b ...

CCE-35533-9
Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings This policy setting allows administrators to enable the more precise auditing capabilities present in Windows Vista. The Audit Policy settings available in Windows Server 2003 Active ...

CCE-35458-9
User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop This policy setting controls whether User Interface Accessibility (UIAccess or UIA) programs can automatically disable the secure desktop for elevation prompts used by a standard user. - Enab ...

CCE-35008-2
System objects: Require case insensitivity for non-Windows subsystems This policy setting determines whether case insensitivity is enforced for all subsystems. The Microsoft Win32? subsystem is case insensitive. However, the kernel supports case sensitivity for other subsystems, such as the Portabl ...

CCE-33081-1
Configure TPM platform validation profile for BIOS-based firmware configurations This policy setting allows you to configure how the computer's Trusted Platform Module (TPM) security hardware secures the BitLocker encryption key. This policy setting does not apply if the computer does not have a co ...

CCE-35182-5
Microsoft network server: Digitally sign communications (if client agrees) This policy setting determines if the server side SMB service is able to sign SMB packets if it is requested to do so by a client that attempts to establish a connection. If no signing request comes from the client, a connec ...

CCE-35406-8
MSS: (WarningLevel) Percentage threshold for the security event log at which the system will generate a warning The registry value entry WarningLevel was added to the template file in the HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\Services\Eventlog\Security\ registry key. The entry appears as MSS ...

CCE-33105-8
Force specific screen saver This policy setting allows you to manage whether or not screen savers run. If the Screen Saver setting is disabled screen savers do not run and the screen saver section of the Screen Saver tab in Display in Control Panel is disabled. If this setting is enabled a screen s ...

CCE-35515-6
Audit Policy: Object Access: Filtering Platform Connection This subcategory reports when connections are allowed or blocked by WFP. These events can be high in volume. Events for this subcategory include: ? 5031: The Windows Firewall Service blocked an application from accepting incoming connection ...

CCE-35177-5
Domain member: Require strong (Windows 2000 or later) session key When this policy setting is enabled, a secure channel can only be established with domain controllers that are capable of encrypting secure channel data with a strong (128-bit) session key. To enable this policy setting, all domain c ...

CCE-33072-0
Choose how BitLocker-protected fixed drives can be recovered This policy setting allows you to control how BitLocker-protected fixed data drives are recovered in the absence of the required credentials. This policy setting is applied when you turn on BitLocker. The 'Allow data recovery agent' ch ...

CCE-33784-0
User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode This policy setting controls the behavior of the elevation prompt for administrators. The options are: - Elevate without prompting: Allows privileged accounts to perform an operation that requires ele ...

CCE-33084-5
Enforce drive encryption type on operating system drives This policy setting allows you to configure the encryption type used by BitLocker Drive Encryption. This policy setting is applied when you turn on BitLocker. Changing the encryption type has no effect if the drive is already encrypted or if ...

CCE-34628-8
Shutdown: Allow system to be shut down without having to log on This policy setting determines whether a computer can be shut down when a user is not logged on. If this policy setting is enabled, the shutdown command is available on the Windows logon screen. Microsoft recommends to disable this pol ...

CCE-34836-7
Turn off Windows Location Provider This policy setting turns off the Windows Location Provider feature for this computer. If you enable this policy setting, the Windows Location Provider feature will be turned off, and all programs on this computer will not be able to use the Windows Loc ...

CCE-35539-6
Enforce drive encryption type on fixed data drives This policy setting allows you to configure the encryption type used by BitLocker Drive Encryption. This policy setting is applied when you turn on BitLocker. Changing the encryption type has no effect if the drive is already encrypted or if encryp ...

CCE-33071-2
Allow access to BitLocker-protected removable data drives from earlier versions of Windows This policy setting configures whether or not removable data drives formatted with the FAT file system can be unlocked and viewed on computers running Windows Server 2008, Windows Vista, Windows XP with Servi ...

CCE-33719-6
Network access: Sharing and security model for local accounts This policy setting determines how network logons that use local accounts are authenticated. The Classic option allows precise control over access to resources, including the ability to assign different types of access to different users ...

CCE-33817-8
Turn off Search Companion content file updates This policy setting specifies whether Search Companion should automatically download content updates during local and Internet searches.

CCE-33783-2
Turn off printing over HTTP This policy setting allows you to disable the client computer?s ability to print over HTTP, which allows the computer to print to printers on the intranet as well as the Internet.

CCE-33083-7
Disallow standard users from changing the PIN or password This policy setting allows you to configure whether or not standard users are allowed to change BitLocker volume PINs, provided they are able to provide the existing PIN first. This policy setting is applied when you turn on BitLocker. ...

CCE-32929-2
Accounts: Limit local account use of blank passwords to console logon only This policy setting determines whether local accounts that are not password protected can be used to log on from locations other than the physical computer console. If you enable this policy setting, local accounts that have ...

CCE-34901-9
Interactive logon: Number of previous logons to cache (in case domain controller is not available) This policy setting determines whether a user can log on to a Windows domain using cached account information. Logon information for domain accounts can be cached locally to allow users to log on even ...

CCE-33815-2
User Account Control: Switch to the secure desktop when prompting for elevation This policy setting controls whether the elevation request prompt is displayed on the interactive user's desktop or the secure desktop. The options are: - Enabled: (Default) All elevation requests go to the secure des ...

CCE-33718-8
Network access: Do not allow storage of passwords and credentials for network authentication This policy setting determines whether the Stored User Names and Passwords feature may save passwords or credentials for later use when it gains domain authentication. If you enable this policy setting, the ...

CCE-33717-0
Microsoft network client: Send unencrypted password to third-party SMB servers Disable this policy setting to prevent the SMB redirector from sending plaintext passwords during authentication to third-party SMB servers that do not support password encryption. Microsoft recommends that you disable t ...

CCE-35438-1
MSS: (AutoAdminLogon) Enable Automatic Logon (not recommended) The registry value entry AutoAdminLogon was added to the template file in the HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ registry key. The entry appears as MSS: (AutoAdminLogon) Enable Automatic Logon (not ...

CCE-35393-8
Allow Secure Boot for integrity validation This policy setting allows you to configure whether Secure Boot will be allowed as the platform integrity provider for BitLocker operating system drives. Secure Boot ensures that the PC's pre-boot environment only loads firmware that is digitally signed ...

CCE-35525-5
Audit Policy: System: IPsec Driver This subcategory reports on the activities of the Internet Protocol security (IPsec) driver. Events for this subcategory include: ? 4960: IPsec dropped an inbound packet that failed an integrity check. If this problem persists, it could indicate a network issue or ...

CCE-35502-4
Audit Policy: DS Access: Directory Service Changes This subcategory reports changes to objects in Active Directory Domain Services (AD DS). The types of changes that are reported are create, modify, move, and undelete operations that are performed on an object. DS Change auditing, where appropriate ...

CCE-35099-1
Interactive logon: Do not require CTRL+ALT+DEL This policy setting determines whether users must press CTRL+ALT+DEL before they log on. If you enable this policy setting, users can log on without this key combination. If you disable this policy setting, users must press CTRL+ALT+DEL before they log ...

CCE-34355-8
Devices: Allowed to format and eject removable media This policy setting determines who is allowed to format and eject removable media. You can use this policy setting to prevent unauthorized users from removing data on one computer to access it on another computer on which they have local administ ...

CCE-33792-3
MSS: (NoDefaultExempt) Configure IPSec exemptions for various types of network traffic. The registry value entry NoDefaultExempt was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IPSEC\ registry key. The entry appears as MSS: (NoDefaultExempt) Configure IPSe ...

CCE-35405-0
MSS: (NoNameReleaseOnDemand) Allow the computer to ignore NetBIOS name release requests except from WINS servers The registry value entry NoNameReleaseOnDemand was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netbt\ Parameters\ registry key. The entry appea ...

CCE-33814-5
MSS: (Hidden) Hide Computer From the Browse List (not recommended except for highly secure environments) The registry value entry Hidden was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters\ registry key. The entry appears as MSS: (Hidde ...

CCE-34902-7
Interactive logon: Require Domain Controller authentication to unlock workstation Logon information is required to unlock a locked computer. For domain accounts, the Interactive logon: Require Domain Controller authentication to unlock workstation setting determines whether it is necessary to conta ...

CCE-33073-8
Configure minimum PIN length for startup This policy setting allows you to configure a minimum length for a Trusted Platform Module (TPM) startup PIN. This policy setting is applied when you turn on BitLocker. The startup PIN must have a minimum length of 4 digits and can have a maximum length of 2 ...

CCE-34597-5
MSS: (EnableICMPRedirect) Allow ICMP redirects to override OSPF generated routes The registry value entry EnableICMPRedirect was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\ registry key. The entry appears as MSS: (EnableICMPRedirect) Allo ...

CCE-33085-2
Reset platform validation data after BitLocker recovery This policy setting allows you to control whether or not platform validation data is refreshed when Windows is started following BitLocker recovery. If you enable this policy setting, platform validation data will be refreshed when Windows ...

CCE-35503-2
Audit Policy: DS Access: Directory Service Replication This subcategory reports when replication between two domain controllers begins and ends. Events for this subcategory include: ? 4932: Synchronization of a replica of an Active Directory naming context has begun. ? 4933: Synchronization of a re ...

CCE-33957-2
Turn off the Windows Messenger Customer Experience Improvement Program This policy setting specifies whether Windows Messenger can collect anonymous information about how the Windows Messenger software and service is used.

CCE-35497-7
Audit Policy: Account Management: Other Account Management Events This subcategory reports other account management events. Events for this subcategory include: ? 4782: The password hash an account was accessed. ? 4793: The Password Policy Checking API was called. Refer to the Microsoft Knowledgeba ...

CCE-33053-0
Create symbolic links This policy setting determines which users can create symbolic links. In Windows Vista, existing NTFS file system objects, such as files and folders, can be accessed by referring to a new kind of file system object called a symbolic link. A symbolic link is a pointer (much lik ...

CCE-33076-1
Control use of BitLocker on removable drives This policy setting controls the use of BitLocker on removable data drives. This policy setting is applied when you turn on BitLocker. When this policy setting is enabled you can select property settings that control how users can configure BitLocker. ...

CCE-35595-8
Set time limit for active but idle Remote Desktop Services sessions This policy setting allows you to specify the maximum amount of time that an active Remote Desktop Services session can be idle (without user input) before it is automatically disconnected. If you enable this policy setting, you m ...

CCE-33715-4
Force shutdown from a remote system This policy setting allows users to shut down Windows Vista?based computers from remote locations on the network. Anyone who has been assigned this user right can cause a denial of service (DoS) condition, which would make the computer unavailable to service user ...

CCE-33088-6
Enforce drive encryption type on removable data drives This policy setting allows you to configure the encryption type used by BitLocker Drive Encryption. This policy setting is applied when you turn on BitLocker. Changing the encryption type has no effect if the drive is already encrypted or if en ...

CCE-35232-8
System objects: Strengthen default permissions of internal system objects (e.g. Symbolic Links) This policy setting determines the strength of the default discretionary access control list (DACL) for objects. The setting helps secure objects that can be located and shared among processes and its de ...

CCE-33802-0
Network security: LDAP client signing requirements This policy setting determines the level of data signing that is requested on behalf of clients that issue LDAP BIND requests, as follows: - None. The LDAP BIND request is issued with the caller-specified options. - Negotiate signing. If Transport ...

CCE-33075-3
Configure use of passwords for removable data drives This policy setting allows you to specify whether smart cards can be used to authenticate user access to BitLocker-protected removable data drives on a computer. If you enable this policy setting smart cards can be used to authenticate user ac ...

CCE-32937-5
Configure use of passwords for operating system drives This policy setting specifies the constraints for passwords used to unlock BitLocker-protected operating system drives. If non-TPM protectors are allowed on operating system drives, you can provision a password, enforce complexity requirements ...

CCE-33041-5
Audit Policy: DS Access: Directory Service Access This subcategory reports when an AD DS object is accessed. Only objects with SACLs cause audit events to be generated, and only when they are accessed in a manner that matches their SACL. These events are similar to the directory service access even ...

CCE-35331-8
Configure Solicited Remote Assistance This policy setting allows you to turn on or turn off Solicited (Ask for) Remote Assistance on this computer. If you enable this policy setting, users on this computer can use email or file transfer to ask someone for help. Also, users can use instant messag ...

CCE-33078-7
Provide the unique identifiers for your organization This policy setting allows you to associate unique organizational identifiers to a new drive that is enabled with BitLocker. These identifiers are stored as the identification field and allowed identification field. The identification field allow ...

CCE-35705-3
Configure use of smart cards on removable data drives This policy setting specifies whether a password is required to unlock BitLocker-protected removable data drives. If you choose to allow use of a password, you can require a password to be used, enforce complexity requirements, and configure a m ...

CCE-35604-8
Enable use of BitLocker authentication requiring preboot keyboard input on slates This policy setting allows users to enable authentication options that require user input from the pre-boot environment even if the platform indicates lack of pre-boot input capability. The Windows on-screen touch ...

CCE-35627-9
Turn off Internet download for Web publishing and online ordering wizards This policy setting specifies whether Windows should download a list of providers for the web publishing and online ordering wizards. These wizards allow users to select from a list of companies that provide services such ...

CCE-32928-4
Access this computer from the network This policy setting allows other users on the network to connect to the computer and is required by various network protocols that include Server Message Block (SMB)?based protocols, NetBIOS, Common Internet File System (CIFS), and Component Object Model Plus ( ...

CCE-35594-1
Turn off printing over HTTP This policy setting specifies whether to allow printing over HTTP from this client. Printing over HTTP allows a client to print to printers on the intranet as well as the Internet. Note: This policy setting affects the client side of Internet printing only. It does ...

CCE-33165-2
Configure use of passwords for fixed data drives This policy setting specifies whether a password is required to unlock BitLocker-protected fixed data drives. If you choose to permit the use of a password, you can require that a password be used, enforce complexity requirements on the password, and ...

CCE-33077-9
Deny write access to removable drives not protected by BitLocker This policy setting configures whether BitLocker protection is required for a computer to be able to write data to a removable data drive. If you enable this policy setting, all removable data drives that are not BitLocker-protecte ...

CCE-35704-6
Choose how BitLocker-protected removable drives can be recovered This policy setting allows you to control how BitLocker-protected removable data drives are recovered in the absence of the required credentials. This policy setting is applied when you turn on BitLocker. The 'Allow data recovery a ...

CCE-35571-9
Server Authentication Certificate Template This policy setting allows you to specify the name of the certificate template that determines which certificate is automatically selected to authenticate an RD Session Host server. A certificate is needed to authenticate an RD Session Host server when SS ...

CCE-35518-0
Audit Policy: Object Access: Other Object Access Events This subcategory reports other object access-related events such as Task Scheduler jobs and COM+ objects. Events for this subcategory include: ? 4671: An application attempted to access a blocked ordinal through the TBS. ? 4691: Indirect acce ...

CCE-34226-1
DCOM: Machine Access Restrictions in Security Descriptor Definition Language (SDDL) syntax This policy setting determines which users or groups might access DCOM application remotely or locally. This setting is used to control the attack surface of the computer for DCOM applications. You can use ...

CCE-35300-3
Network access: Remotely accessible registry paths and sub-paths This policy setting determines which registry paths and sub-paths will be accessible when an application or process references the WinReg key to determine access permissions. Note: In Windows XP this setting is called 'Network access: ...

CCE-34173-5
Deny access to this computer from the network This policy setting prohibits users from connecting to a computer from across the network, which would allow users to access and potentially modify data remotely. In high security environments, there should be no need for remote users to access data on ...

CCE-35225-2
Network security: Do not store LAN Manager hash value on next password change This policy setting determines whether the LAN Manager (LM) hash value for the new password is stored when the password is changed. The LM hash is relatively weak and prone to attack compared to the cryptographically stro ...

CCE-35007-4
System cryptography: Force strong key protection for user keys stored on the computer This policy setting determines whether users' private keys (such as their S-MIME keys) require a password to be used. If you configure this policy setting so that users must provide a password?distinct from their ...

CCE-33975-4
Specify the maximum log file size (KB) This policy setting specifies the maximum size of the log file in kilobytes. If you enable this policy setting, you can configure the maximum log file size to be between 1 megabyte (1024 kilobytes) and 2 terabytes (2147483647 kilobytes) in kilobyte incremen ...

CCE-34172-7
Audit Policy: Object Access: File System This subcategory reports when file system objects are accessed. Only file system objects with SACLs cause audit events to be generated, and only when they are accessed in a manner matching their SACL. By itself, this policy setting will not cause auditing of ...

CCE-35698-0
Audit Policy: Policy Change: Other Policy Change Events This subcategory reports other types of security policy changes such as configuration of the Trusted Platform Module (TPM) or cryptographic providers. Events for this subcategory include: ? 4909: The local policy settings for the TBS were chan ...

CCE-35641-0
System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing This policy setting determines whether the Transport Layer Security/Secure Sockets Layer (TLS/SSL) Security Provider supports only the TLS_RSA_WITH_3DES_EDE_CBC_SHA cipher suite. Although this policy setting inc ...

CCE-35488-6
Accounts: Rename guest account The built-in local guest account is another well-known name to attackers. Microsoft recommends to rename this account to something that does not indicate its purpose. Even if you disable this account, which is recommended, ensure that you rename it for added security. ...

CCE-35499-3
Audit Policy: Account Management: User Account Management This subcategory reports each event of user account management, such as when a user account is created, changed, or deleted; a user account is renamed, disabled, or enabled; or a password is set or changed. If you enable this Audit policy se ...

CCE-35367-2
Network access: Let Everyone permissions apply to anonymous users This policy setting determines what additional permissions are assigned for anonymous connections to the computer. If you enable this policy setting, anonymous Windows users are allowed to perform certain activities, such as enumerat ...

CCE-33168-6
Screen saver timeout If the Screen Saver Timeout setting is enabled, then the screen saver will be launched when the specified amount of time has passed since the last user action. Valid values range from 1 to 89,400 seconds (24 hours). The setting has no effect if the wait time is set to zero or n ...

CCE-35430-8
Audit Policy: Privilege Use: Other Privilege Use Events This subcategory is not used.

CCE-34899-5
Interactive logon: Machine account lockout threshold The machine lockout policy is enforced only on those machines that have Bitlocker enabled for protecting OS volumes. Please ensure that appropriate recovery password backup policies are enabled. This security setting determines the number of fai ...

CCE-33777-4
Password must meet complexity requirements This policy setting checks all new passwords to ensure that they meet basic requirements for strong passwords. When this policy is enabled, passwords must meet the following minimum requirements: - Not contain the user's account name or parts of the user's ...

CCE-33169-4
Allow Standby States (S1-S3) When Sleeping (On Battery) Dictates whether or not Windows is allowed to use standby states when sleeping the computer. When this policy is enabled, Windows may use standby states to sleep the computer. If this policy is disabled, the only sleep state a compute ...

CCE-32935-9
Audit Policy: Object Access: SAM This subcategory reports when SAM objects are accessed. Refer to the Microsoft Knowledgebase article ?Description of security events in Windows Vista and in Windows Server 2008? for the most recent information about this setting: http://support.microsoft.com/default ...

CCE-33789-9
Minimum password length This policy setting determines the least number of characters that make up a password for a user account. There are many different theories about how to determine the best password length for an organization, but perhaps 'pass phrase' is a better term than 'password.' In Mic ...

CCE-35402-7
Do not process the run once list This policy setting ignores customized run-once lists. You can create a customized list of additional programs and documents that are started automatically the next time the system starts (but not thereafter). These programs are added to the standard list of prog ...

CCE-33776-6
Audit Policy: Policy Change: Filtering Platform Policy Change This subcategory reports the addition and removal of objects from WFP, including startup filters. These events can be very high in volume. Events for this subcategory include: ? 4709: IPsec Services was started. ? 4710: IPsec Services w ...

CCE-35511-5
Audit Policy: Logon-Logoff: Special Logon This subcategory reports when a special logon is used. A special logon is a logon that has administrator-equivalent privileges and can be used to elevate a process to a higher level. Events for this subcategory include: ? 4964 : Special groups have been ass ...

CCE-33799-8
Notify antivirus programs when opening attachments Antivirus programs are mandatory in many environments and provide a strong defense against attack. The Notify antivirus programs when opening attachments setting allows you to manage how registered antivirus programs are notified. When enabled, thi ...

CCE-33091-0
Audit Policy: Policy Change: Authentication Policy Change This subcategory reports changes in authentication policy. Events for this subcategory include: ? 4706: A new trust was created to a domain. ? 4707: A trust to a domain was removed. ? 4713: Kerberos policy was changed. ? 4716: Trusted doma ...

CCE-35436-5
Do not process the legacy run list This policy setting causes the run list, which is a list of programs that Windows runs automatically when it starts, to be ignored. The customized run lists for Windows Vista are stored in the registry at the following locations: - HKEY_LOCAL_MACHINE\Software\Micr ...

CCE-33788-1
User Account Control: Run all administrators in Admin Approval Mode This policy setting controls the behavior of all User Account Control (UAC) policy settings for the computer. If you change this policy setting, you must restart your computer. The options are: - Enabled: (Default) Admin Approval ...

CCE-35500-8
Audit Policy: Detailed Tracking: RPC Events This subcategory reports remote procedure call (RPC) connection events. Events for this subcategory include: ? 5712: A Remote Procedure Call (RPC) was attempted. Refer to the Microsoft Knowledgebase article ?Description of security events in Windows Vist ...

CCE-34965-4
Network access: Named Pipes that can be accessed anonymously This policy setting determines which communication sessions, or pipes, will have attributes and permissions that allow anonymous access. Note: When you configure this setting you specify a list of one or more objects. The delimiter used w ...

CCE-33090-2
Audit Policy: Logon-Logoff: IPsec Extended Mode This subcategory reports the results of AuthIP during Extended Mode negotiations. Events for this subcategory include: ? 4978: During Extended Mode negotiation, IPsec received an invalid negotiation packet. If this problem persists, it could indicate ...

CCE-34723-7
Network access: Do not allow anonymous enumeration of SAM accounts and shares This policy setting controls the ability of anonymous users to enumerate SAM accounts as well as shares. If you enable this policy setting, anonymous users will not be able to enumerate domain account user names and netwo ...

CCE-33960-6
Always prompt for password upon connection This policy setting specifies whether Terminal Services always prompts the client computer for a password upon connection. You can use this policy setting to enforce a password prompt for users who log on to Terminal Services, even if they already provided ...

CCE-35524-8
Audit Policy: Privilege Use: Sensitive Privilege Use This subcategory reports when a user account or service uses a sensitive privilege. A sensitive privilege includes the following user rights: Act as part of the operating system, Back up files and directories, Create a token object, Debug progra ...

CCE-35392-0
Enable RPC Endpoint Mapper Client Authentication This policy setting controls whether RPC clients authenticate with the Endpoint Mapper Service when the call they are making contains authentication information. The Endpoint Mapper Service on computers running Windows NT4 (all service packs) canno ...

CCE-35302-9
Network security: LAN Manager authentication level LAN Manager (LM) is a family of early Microsoft client/server software that allows users to link personal computers together on a single network. Network capabilities include transparent file and print sharing, user security features, and network a ...

CCE-35578-4
Set client connection encryption level This policy setting specifies whether the computer that is about to host the remote connection will enforce an encryption level for all data sent between it and the client computer for the remote session.

CCE-32932-6
Audit Policy: Account Management: Application Group Management This subcategory reports each event of application group management on a computer, such as when an application group is created, changed, or deleted or when a member is added to or removed from an application group. If you enable this A ...

CCE-33786-5
User Account Control: Only elevate executables that are signed and validated This policy setting enforces public key infrastructure (PKI) signature checks for any interactive applications that request elevation of privilege. Enterprise administrators can control which applications are allowed to ru ...

CCE-35521-4
Audit Policy: Policy Change: Audit Policy Change This subcategory reports changes in audit policy including SACL changes. Events for this subcategory include: ? 4715: The audit policy (SACL) on an object was changed. ? 4719: System audit policy was changed. ? 4902: The Per-user audit policy table ...

CCE-33039-9
Audit Policy: Detailed Tracking: DPAPI Activity This subcategory reports encrypt or decrypt calls into the data protections application interface (DPAPI). DPAPI is used to protect secret information such as stored password and key information. Events for this subcategory include: ? 4692: Backup of ...

CCE-35401-9
User Account Control: Only elevate UIAccess applications that are installed in secure locations This policy setting controls whether applications that request to run with a User Interface Accessibility (UIAccess) integrity level must reside in a secure location in the file system. Secure locations ...

CCE-35447-2
Network security: Minimum session security for NTLM SSP based (including secure RPC) clients This policy setting determines which behaviors are allowed for applications using the NTLM Security Support Provider (SSP). The SSP Interface (SSPI) is used by applications that need authentication services ...

CCE-35510-7
Audit Policy: Logon-Logoff: Other Logon/Logoff Events This subcategory reports other logon/logoff-related events, such as Terminal Services session disconnects and reconnects, using RunAs to run processes under a different account, and locking and unlocking a workstation. Events for this subcategor ...

CCE-33785-7
User Account Control: Behavior of the elevation prompt for standard users This policy setting controls the behavior of the elevation prompt for standard users. The options are: - Prompt for credentials: When an operation requires elevation of privilege, the user is prompted to enter an administra ...

CCE-33410-2
Audit Policy: Account Management: Computer Account Management This subcategory reports each event of computer account management, such as when a computer account is created, changed, deleted, renamed, disabled, or enabled. Events for this subcategory include: ? 4741: A computer account was created. ...

CCE-35429-0
User Account Control: Detect application installations and prompt for elevation This policy setting controls the behavior of application installation detection for the computer. The options are: - Enabled: (Default for home) When an application installation package is detected that requires eleva ...

CCE-34354-1
Audit Policy: Object Access: Registry This subcategory reports when registry objects are accessed. Only registry objects with SACLs cause audit events to be generated, and only when they are accessed in a manner matching their SACL. By itself, this policy setting will not cause auditing of any even ...

CCE-35602-2
Audit Policy: Object Access: Application Generated This subcategory reports when applications attempt to generate audit events by using the Windows auditing application programming interfaces (APIs). Events for this subcategory include: ? 4665: An attempt was made to create an application client co ...

CCE-35779-8
Turn off Data Execution Prevention for HTML Help Executible This policy setting allows you to exclude HTML Help Executable from being monitored by software-enforced DEP. DEP is designed to block malicious code that takes advantage of exception-handling mechanisms in Windows. If you enab ...

CCE-35504-0
Audit Policy: Logon-Logoff: Account Lockout This subcategory reports when a user's account is locked out as a result of too many failed logon attempts. Events for this subcategory include: ? 4625: An account failed to log on. Refer to the Microsoft Knowledgebase article ?Description of security ev ...

CCE-35527-1
Audit Policy: System: System Integrity This subcategory reports on violations of integrity of the security subsystem. Events for this subcategory include: ? 4612 : Internal resources allocated for the queuing of audit messages have been exhausted, leading to the loss of some audits. ? 4615 : Inval ...

CCE-35494-4
Audit Policy: Account Logon: Credential Validation This subcategory reports the results of validation tests on credentials submitted for a user account logon request. These events occur on the computer that is authoritative for the credentials. For domain accounts, the domain controller is authorit ...

CCE-35460-5
Do not process the legacy run list This policy setting ignores the customized run list. You can create a customized list of additional programs and documents that the system starts automatically when it runs on Windows Vista, Windows XP Professional, and Windows 2000 Professional. These programs ...

CCE-33816-0
MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing) The registry value entry DisableIPSourceRouting was added to the template file in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\ registry key. The entry appears as MSS: (D ...

CCE-33949-9
Accounts: Guest account status This policy setting determines whether the Guest account is enabled or disabled. The Guest account allows unauthenticated network users to gain access to the system. Note that this setting will have no impact when applied to the domain controller organizational unit v ...

CCE-34900-1
Interactive logon: Machine inactivity limit Windows notices inactivity of a logon session, and if the amount of inactive time exceeds the inactivity limit, then the screen saver will run, locking the session.

CCE-35516-4
Audit Policy: Object Access: Handle Manipulation This subcategory reports when a handle to an object is opened or closed. Only objects with SACLs cause these events to be generated, and only if the attempted handle operation matches the SACL. Handle Manipulation events are only generated for object ...

CCE-35603-0
Audit Policy: Object Access: Filtering Platform Packet Drop This subcategory reports when packets are dropped by Windows Filtering Platform (WFP). These events can be very high in volume. Events for this subcategory include: ? 5152: The Windows Filtering Platform blocked a packet. ? 5153: A more r ...

CCE-33238-7
Turn off Autoplay This policy setting allows you to turn off the Autoplay feature. Autoplay begins reading from a drive as soon as you insert media in the drive. As a result, the setup file of programs and the music on audio media start immediately. Prior to Windows XP SP2 ...

CCE-35505-7
Audit Policy: Logon-Logoff: IPsec Main Mode This subcategory reports the results of Internet Key Exchange (IKE) protocol and Authenticated Internet Protocol (AuthIP) during Main Mode negotiations. Events for this subcategory include: ? 4646: IKE DoS-prevention mode started. ? 4650: An IPsec Main Mo ...

CCE-33608-1
Turn off Data Execution Prevention for Explorer Disabling data execution prevention can allow certain legacy plug-in applications to function without terminating Explorer.

CCE-33563-8
Network access: Restrict anonymous access to Named Pipes and Shares When enabled, this policy setting restricts anonymous access to only those shares and pipes that are named in the Network access: Named pipes that can be accessed anonymously and Network access: Shares that can be accessed anonymou ...

CCE-34619-7
MSS: (ScreenSaverGracePeriod) The time in seconds before the screen saver grace period expires (0 recommended) The registry value entry ScreenSaverGracePeriod was added to the template file in the HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\ Windows NT\CurrentVersion\Winlogon\ registry key. The en ...

CCE-34705-4
Do not process the run once list This policy setting causes the run once list, which is the list of programs that Windows Vista runs automatically when it starts, to be ignored. This policy setting differs from the Do not process the legacy run list setting in that programs on this list will run on ...

CCE-33782-4
Require a Password When a Computer Wakes (On Battery) Specifies whether or not the user is prompted for a password when the system resumes from sleep.

CCE-33040-7
Audit Policy: Detailed Tracking: Process Creation This subcategory reports the creation of a process and the name of the program or user that created it. Events for this subcategory include: ? 4688: A new process has been created. ? 4696: A primary token was assigned to process. Refer to the Micros ...

CCE-35219-5
Enforce password history This policy setting determines the number of renewed, unique passwords that have to be associated with a user account before you can reuse an old password. The value for this policy setting must be between 0 and 24 passwords. The default value for Windows Vista is 0 passwor ...

CCE-35370-6
Store passwords using reversible encryption This policy setting determines whether the operating system stores passwords in a way that uses reversible encryption, which provides support for application protocols that require knowledge of the user's password for authentication purposes. Passwords th ...

CCE-33728-7
Account lockout threshold This policy setting determines the number of failed logon attempts before a lock occurs. Authorized users can lock themselves out of an account by mistyping their password or by remembering it incorrectly, or by changing their password on one computer while logged on to an ...

CCE-34771-6
Set the default behavior for AutoRun This policy setting sets the default behavior for Autorun commands. Autorun commands are generally stored in autorun.inf files. They often launch the installation program or other routines. Prior to Windows Vista, when media containing ...

CCE-34169-3
Control Event Log behavior when the log file reaches its maximum size This policy setting controls Event Log behavior when the log file reaches its maximum size. If you enable this policy setting and a log file reaches its maximum size, new events are not written to the log and are lost. If y ...

CCE-35723-6
Require secure RPC communication Specifies whether a Remote Desktop Session Host server requires secure RPC communication with all clients or allows unsecured communication. You can use this setting to strengthen the security of RPC communication with clients by allowing only authenticated and enc ...

CCE-35601-4
Audit Policy: Detailed Tracking: Process Termination This subcategory reports when a process terminates. Events for this subcategory include: ? 4689: A process has exited. Refer to the Microsoft Knowledgebase article ?Description of security events in Windows Vista and in Windows Server 2008? for t ...

CCE-35526-3
Audit Policy: System: Security System Extension This subcategory reports the loading of extension code such as authentication packages by the security subsystem. Events for this subcategory include: ? 4610: An authentication package has been loaded by the Local Security Authority. ? 4611: A truste ...

CCE-34651-0
Network access: Shares that can be accessed anonymously This policy setting determines which network shares can be accessed by anonymous users. The default configuration for this policy setting has little effect because all users have to be authenticated before they can access shared resources on t ...

CCE-33791-5
Turn off Autoplay Autoplay starts to read from a drive as soon as you insert media in the drive, which causes the setup file for programs or audio media to start immediately. An attacker could use this feature to launch a program to damage the computer or data on the computer. You can enable the Tu ...

CCE-32938-3
Password protect the screen saver If the Password protect the screen saver setting is enabled, then all screen savers are password protected, if it is disabled then password protection cannot be set on any screen saver.

CCE-35399-5
Audit Policy: Object Access: File Share This subcategory reports when a file share is accessed. By itself, this policy setting will not cause auditing of any events. It determines whether to audit the event of a user who accesses a file share object that has a specified system access control list ( ...

CCE-35255-9
Allow users to connect remotely by using Remote Desktop Services This policy setting allows you to configure remote access to computers by using Remote Desktop Services. If you enable this policy setting, users who are members of the Remote Desktop Users group on the target computer can connect ...

CCE-34893-8
Domain member: Digitally sign secure channel data (when possible) This policy setting determines whether a domain member should attempt to negotiate whether all secure channel traffic that it initiates must be digitally signed. Digital signatures protect the traffic from being modified by anyone wh ...

CCE-33042-3
Audit Policy: Policy Change: Authorization Policy Change This subcategory reports changes in authorization policy including permissions (DACL) changes. Events for this subcategory include: ? 4704: A user right was assigned. ? 4705: A user right was removed. ? 4706: A new trust was created to a do ...

CCE-35508-1
Audit Policy: Logon-Logoff: Logon This subcategory reports when a user attempts to log on to the system. These events occur on the accessed computer. For interactive logons, the generation of these events occurs on the computer that is logged on to. If a network logon takes place to access a share, ...

CCE-35366-4
Minimum password age This policy setting determines the number of days that you must use a password before you can change it. The range of values for this policy setting is between 1 and 999 days. (You may also set the value to 0 to allow immediate password changes.) The default value for this sett ...

CCE-33790-7
MSS: (DisableIPSourceRouting IPv6) IP source routing protection level (protects against packet spoofing) This entry appears as MSS: (DisableIPSourceRouting) IPv6 source routing protection level (protects against packet spoofing) in the SCE. IP source routing is a mechanism that allows the sender to ...

CCE-35498-5
Audit Policy: Account Management: Security Group Management This subcategory reports each event of security group management, such as when a security group is created, changed, or deleted or when a member is added to or removed from a security group. If you enable this Audit policy setting, adminis ...

CCE-34894-6
Domain member: Maximum machine account password age This policy setting determines the maximum allowable age for a computer account password. By default, domain members automatically change their domain passwords every 30 days. If you increase this interval significantly or set it to 0 so that the ...

CCE-33164-5
Enable screen saver This policy setting allows you to manage whether or not screen savers run. If the Screen Saver setting is disabled screen savers do not run and the screen saver section of the Screen Saver tab in Display in Control Panel is disabled. If this setting is enabled a screen saver wil ...

CCE-35408-4
Reset account lockout counter after This policy setting determines the length of time before the Account lockout threshold resets to zero. The default value for this policy setting is Not Defined. If the Account lockout threshold is defined, this reset time must be less than or equal to the value f ...

CCE-35288-0
Specify the maximum log file size (KB) This policy setting specifies the maximum size of the log file in kilobytes. If you enable this policy setting, you can configure the maximum log file size to be between 1 megabyte (1024 kilobytes) and 2 terabytes (2147483647 kilobytes) in kilobyte incremen ...

CCE-35461-3
Deny log on as a batch job This policy setting determines which accounts will not be able to log on to the computer as a batch job. A batch job is not a batch (.bat) file, but rather a batch-queue facility. Accounts that use the Task Scheduler to schedule jobs need this user right. The Deny log on ...

CCE-35517-2
Audit Policy: Object Access: Kernel Object This subcategory reports when kernel objects such as processes and mutexes are accessed. Only kernel objects with SACLs cause audit events to be generated, and only when they are accessed in a manner matching their SACL. Typically kernel objects are only g ...

CCE-34993-6
Network security: Force logoff when logon hours expire This policy setting, which determines whether to disconnect users who are connected to the local computer outside their user account?s valid logon hours, affects the SMB component. If you enable this policy setting, client sessions with the SMB ...

CCE-33428-4
Specify the maximum log file size (KB) This policy setting specifies the maximum size of the log file in kilobytes. If you enable this policy setting, you can configure the maximum log file size to be between 1 megabyte (1024 kilobytes) and 2 terabytes (2147483647 kilobytes) in kilobyte incremen ...

CCE-35506-5
Audit Policy: Logon-Logoff: IPsec Quick Mode This subcategory reports the results of IKE protocol and AuthIP during Quick Mode negotiations. ? 4654: An IPsec Quick Mode negotiation failed. Events for this subcategory include: ? 4977: During Quick Mode negotiation, IPsec received an invalid negotiat ...

CCE-35739-2
Set the default behavior for AutoRun This policy setting sets the default behavior for Autorun commands. Autorun commands are generally stored in autorun.inf files. They often launch the installation program or other routines. Prior to Windows Vista, when media containing ...

CCE-35409-2
Account lockout duration This policy setting determines the length of time that must pass before a locked account is unlocked and a user can try to log on again. The setting does this by specifying the number of minutes a locked out account will remain unavailable. If the value for this policy sett ...

CCE-35496-9
Audit Policy: Account Logon: Kerberos Service Ticket Operations This subcategory reports generated by Kerberos ticket request processes on the domain controller that is authoritative for the domain account. Events for this subcategory include: ? 4769: A Kerberos service ticket was requested. ? 4770 ...

CCE-35462-1
Require a Password When a Computer Wakes (Plugged In) Specifies whether or not the user is prompted for a password when the system resumes from sleep.

CCE-34631-2
Network access: Do not allow anonymous enumeration of SAM accounts This policy setting controls the ability of anonymous users to enumerate the accounts in the Security Accounts Manager (SAM). If you enable this policy setting, users with anonymous connections cannot enumerate domain account user n ...

CCE-34907-6
Maximum password age This policy setting defines how long a user can use their password before it expires. Values for this policy setting range from 0 to 999 days. If you set the value to 0, the password will never expire. The default value for this policy setting is 42 days. Because attackers can ...

CCE-33043-1
Audit Policy: System: Security State Change This subcategory reports changes in security state of the system, such as when the security subsystem starts and stops. Events for this subcategory include: ? 4608: Windows is starting up. ? 4609: Windows is shutting down. ? 4616: The system time was ch ...

CCE-35507-3
Audit Policy: Logon-Logoff: Logoff This subcategory reports when a user logs off from the system. These events occur on the accessed computer. For interactive logons, the generation of these events occurs on the computer that is logged on to. If a network logon takes place to access a share, these ...

CPE    1
cpe:/o:microsoft:windows_8.1
*XCCDF
xccdf_org.secpod_benchmark_HIPAA_45CFR_164_Windows_8_1
OVAL    213
oval:org.secpod.oval:def:29568
oval:org.secpod.oval:def:29311
oval:org.secpod.oval:def:22615
oval:org.secpod.oval:def:22619
...

© 2013 SecPod Technologies