[Forgot Password]
Login  Register Subscribe

30389

 
 

423868

 
 

244411

 
 

909

 
 

193363

 
 

277

Paid content will be excluded from the download.


Download | Alert*


CCE-22042-6
The 'Network access: Allow anonymous SID/Name translation' setting should be configured correctly.

CCE-22873-4
Determines whether a user can install and configure the Network Bridge. Important: This settings is location aware. It only applies when a computer is connected to the same DNS domain network it was connected to when the setting was refreshed on that computer. If a computer is connected to a DNS do ...

CCE-22206-7
Auditing of "Object Access: Other Object Access Events" events on failure should be enabled or disabled as appropriate.

CCE-22850-2
Set the default behavior for AutoRun

CCE-21820-6
Auditing of 'Detailed Tracking: RPC Events' events on failure should be enabled or disabled as appropriate.

CCE-22666-2
The 'Do not process the run once list' setting should be configured correctly.

CCE-22436-0
The 'User Account Control: Only elevate executables that are signed and validated' setting should be configured correctly.

CCE-22798-3
Auditing of "Policy Change: Other Policy Change Events" events on failure should be enabled or disabled as appropriate.

CCE-21591-3
The "Do not send additional data" setting should be configured correctly.

CCE-22184-6
Auditing of "Object Access: Kernel Object" events on success should be enabled or disabled as appropriate.

CCE-22632-4
Specify the maximum log file size (KB)

CCE-22150-7
The "Turn off Autoplay for non-volume devices" setting should be configured correctly.

CCE-23454-2
Auditing of 'Policy Change: Authentication Policy Change' events on success should be enabled or disabled as appropriate.

CCE-22906-2
The "Network access: Do not allow anonymous enumeration of SAM accounts and shares" setting should be configured correctly.

CCE-23180-3
Windows Firewall: Private: Outbound connections

CCE-23017-7
Windows Firewall: Public: Logging: Log dropped packets

CCE-21831-3
The "Turn Off the Display (Plugged In)" machine setting should be configured correctly.

CCE-23104-3
Turn off the "Order Prints" picture task

CCE-22349-5
The "MSS: (AutoAdminLogon) Enable Automatic Logon (not recommended)" setting should be configured correctly.

CCE-22294-3
The 'User Account Control: Admin Approval Mode for the Built-in Administrator account' setting should be configured correctly.

CCE-22534-2
Auditing of 'DS Access: Directory Service Access' events on success should be enabled or disabled as appropriate.

CCE-23127-4
The "Always prompt for password upon connection" machine setting should be configured correctly.

CCE-22303-2
The 'Audit: Shut down system immediately if unable to log security audits' setting should be configured correctly.

CCE-21635-8
The "Require a Password When a Computer Wakes (Plugged In)" machine setting should be configured correctly.

CCE-22437-8
Auditing of "Detailed Directory Service Replication" events on success should be enabled or disabled as appropriate.

CCE-21844-6
Auditing of 'Object Access: Detailed File Share' events on failure should be enabled or disabled as appropriate.

CCE-23192-8
The 'Take ownership of files or other objects' user right should be assigned to the appropriate accounts.

CCE-21999-8
The 'Audit: Audit the access of global system objects' setting should be configured correctly.

CCE-22183-8
The "Turn off downloading of print drivers over HTTP" machine setting should be configured correctly.

CCE-22905-4
Auditing of 'Detailed Tracking: Process Creation' events on success should be enabled or disabled as appropriate.

CCE-22402-2
The 'Account lockout duration' setting should be configured correctly.

CCE-21855-2
Auditing of 'Logon-Logoff: IPsec Quick Mode' events on success should be enabled or disabled as appropriate.

CCE-22993-0
Windows Firewall: Public: Allow unicast response

CCE-22558-1
Auditing of "Object Access: Filtering Platform Packet Drop" events on success should be enabled or disabled as appropriate.

CCE-21394-2
Reschedule Automatic Updates scheduled installations This policy setting determines the amount of time before previously scheduled Automatic Update installations will proceed after system startup. If you configure this policy setting to Enabled, a previously scheduled installation will begin after ...

CCE-22204-2
Auditing of "Policy Change: Authorization Policy Change" events on failure should be enabled or disabled as appropriate.

CCE-23336-1
Auditing of "Account Management: Application Group Management" events on failure should be enabled or disabled as appropriate.

CCE-21152-4
This policy setting allows you to turn on or turn off Offer (Unsolicited) Remote Assistance on this computer. If you enable this policy setting, users on this computer can get help from their corporate technical support staff using Offer (Unsolicited) Remote Assistance. If you disable this policy ...

CCE-22182-0
The "Troubleshooting: Allow users to access online troubleshooting content on Microsoft servers from the Troubleshooting Control Panel (via the Windows Online Troubleshooting Service - WOTS)" machine setting should be configured correctly.

CCE-22129-1
The "Turn off Internet Connection Wizard if URL connection is referring to Microsoft.com" machine setting should be configured correctly.

CCE-22359-4
This policy setting determines whether a domain member can periodically change its computer account password. If you enable this policy setting, the domain member will be prevented from changing its computer account password. If you disable this policy setting, the domain member can change its compu ...

CCE-22589-6
Set 6to4 State

CCE-22909-6
The "Enforce password history" setting should be configured correctly.

CCE-21810-7
Windows Firewall: Domain: Logging: Log successful connections

CCE-22630-8
Auditing of 'Policy Change: MPSSVC Rule-Level Policy Change' events on failure should be enabled or disabled as appropriate.

CCE-21627-5
The "Allow Standby States (S1-S3) When Sleeping (On Battery)" machine setting should be configured correctly.

CCE-22886-6
The 'Force shutdown from a remote system' user right should be assigned to the appropriate accounts.

CCE-22863-5
Enable RPC Endpoint Mapper Client Authentication

CCE-22676-1
The 'Windows Firewall: Private: Apply local firewall rules' setting should be configured correctly.

CCE-22950-0
The "Shutdown: Clear virtual memory pagefile" setting should be configured correctly.

CCE-22324-8
Windows Firewall: Domain: Outbound connections

CCE-22578-9
The 'MSS: (DisableIPSourceRouting IPv6) IP source routing protection level (protects against packet spoofing)' setting should be configured correctly.

CCE-22301-6
The 'Network Security: Configure encryption types allowed for Kerberos' setting should be configured correctly.

CCE-22688-6
The 'Adjust memory quotas for a process' user right should be assigned to the appropriate accounts.

CCE-21516-0
The 'Microsoft network server: Disconnect clients when logon hours expire' setting should be configured correctly.

CCE-22060-8
The "MSS: (SafeDllSearchMode) Enable Safe DLL search mode (recommended)" setting should be configured correctly.

CCE-22458-4
Windows Firewall: Domain: Logging: Size limit (KB)

CCE-22181-2
Windows Firewall: Public: Outbound connections

CCE-22960-9
The 'Increase scheduling priority' user right should be assigned to the appropriate accounts.

CCE-21471-8
Auditing of 'DS Access: Detailed Directory Service Replication' events on failure should be enabled or disabled as appropriate.

CCE-22567-2
The "Password must meet complexity requirements" setting should be configured correctly.

CCE-23062-3
The "Turn off the Windows Messenger Customer Experience Improvement Program" machine setting should be configured correctly.

CCE-22469-1
The 'Modify an object label' user right should be assigned to the appropriate accounts.

CCE-21396-7
The "Require domain users to elevate when setting a network's location" machine setting should be configured correctly.

CCE-21460-1
Windows Firewall: Private: Logging: Name

CCE-23096-1
Auditing of "Account Management: Distribution Group Management" events on failure should be enabled or disabled as appropriate.

CCE-22291-9
The "Change the time zone" user right should be assigned to the appropriate accounts.

CCE-23073-0
Auditing of 'System: Security System Extension' events on success should be enabled or disabled as appropriate.

CCE-22787-6
The 'Allow Standby States (S1-S3) When Sleeping (Plugged In)' setting should be configured correctly.

CCE-21736-4
Control Event Log behavior when the log file reaches its maximum size

CCE-21638-2
The 'Deny log on through Remote Desktop Services' user right should be assigned to the appropriate accounts.

CCE-21921-2
The 'Network access: Do not allow storage of passwords and credentials for network authentication' setting should be configured correctly.

CCE-22624-1
Auditing of "Privilege Use: Sensitive Privilege Use" events on failure should be enabled or disabled as appropriate.

CCE-21617-6
The 'Create a pagefile' user right should be assigned to the appropriate accounts.

CCE-21801-6
The 'User Account Control: Switch to the secure desktop when prompting for elevation' setting should be configured correctly.

CCE-22854-4
Auditing of 'Policy Change: Audit Policy Change' events on success should be enabled or disabled as appropriate.

CCE-22877-5
Windows Firewall: Private: Display a notification

CCE-21910-5
This policy setting determines whether the operating system stores passwords in a way that uses reversible encryption, which provides support for application protocols that require knowledge of the users password for authentication purposes. Passwords that are stored with reversible encryption are e ...

CCE-21726-5
Auditing of "Object Access: Certification Services" events on failure should be enabled or disabled as appropriate.

CCE-21956-8
Auditing of 'DS Access: Directory Service Changes' events on success should be enabled or disabled as appropriate.

CCE-22319-8
The 'Allow Remote Shell Access' setting should be configured correctly.

CCE-23447-6
Windows Firewall: Private: Logging: Size limit (KB)

CCE-23036-7
Auditing of "Account Management: Other Account Management Events" events on failure should be enabled or disabled as appropriate.

CCE-21629-1
Allow user control over installs

CCE-23100-1
The 'MSS: (WarningLevel) Percentage threshold for the security event log at which the system will generate a warning' setting should be configured correctly.

CCE-21968-3
The 'Windows Firewall: Domain: Apply local firewall rules' setting should be configured correctly.

CCE-22481-6
The "Turn off Registration if URL connection is referring to Microsoft.com" machine setting should be configured correctly.

CCE-22187-9
The "Prohibit Access of the Windows Connect Now wizards" machine setting should be configured correctly.

CCE-22350-3
Enable indexing uncached Exchange folders

CCE-22876-7
Auditing of "System: Security State Change" events on failure should be enabled or disabled as appropriate.

CCE-23521-8
Windows Firewall: Domain: Logging: Name

CCE-23158-9
The "Set time limit for active but idle Remote Desktop Services sessions" machine setting should be configured correctly.

CCE-22285-1
The 'Do not display 'Install Updates and Shut Down' option in Shut Down Windows dialog box' setting should be configured correctly.

CCE-22592-0
The 'Maximum password age' setting should be configured correctly.

CCE-22384-2
The 'Recovery console: Allow automatic administrative logon' setting should be configured correctly.

CCE-21791-9
The 'Microsoft network server: Digitally sign communications (always)' setting should be configured correctly.

CCE-21836-2
The "Do not use temporary folders per session" machine setting should be configured correctly.

CCE-23578-8
When enabled, this policy setting causes Local System services that use Negotiate to use the computer identity when NTLM authentication is selected by the negotiation. This policy is supported on at least Windows 7 or Windows Server 2008 R2. Countermeasure: Configure Network security: Allo ...

CCE-23124-1
The 'Turn off Data Execution Prevention for Explorer' setting should be configured correctly.

CCE-22637-3
Control Event Log behavior when the log file reaches its maximum size

CCE-22539-1
The 'Turn off printing over HTTP' setting should be configured correctly.

CCE-22130-9
The "Prevent Automatic Updates" machine setting should be configured correctly.

CCE-21826-3
Windows Firewall: Private: Inbound connections

CCE-22438-6
Auditing of 'Account Logon: Kerberos Authentication Service' events on failure should be enabled or disabled as appropriate.

CCE-23566-3
The 'Bypass traverse checking' user right should be assigned to the appropriate accounts.

CCE-21453-6
The "System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" setting should be configured correctly.

CCE-23159-7
The "Turn off Automatic Root Certificates Update" machine setting should be configured correctly.

CCE-21660-6
The "MSS: (PerformRouterDiscovery) Allow IRDP to detect and configure Default Gateway addresses (could lead to DoS)" setting should be configured correctly.

CCE-22491-5
The "Turn off Microsoft Peer-to-Peer Networking Services" machine setting should be configured correctly.

CCE-22152-3
The 'Turn off Internet download for Web publishing and online ordering wizards' setting should be configured correctly.

CCE-22381-8
Auditing of 'Account Management: Security Group Management' events on success should be enabled or disabled as appropriate.

CCE-22611-8
This policy setting determines whether a domain member should attempt to negotiate encryption for all secure channel traffic that it initiates. If you enable this policy setting, the domain member will request encryption of all secure channel traffic. If you disable this policy setting, the domain m ...

CCE-21671-3
The 'Account lockout threshold' setting should be configured correctly.

CCE-22723-1
Auditing of 'Logon-Logoff: Other Logon/Logoff Events' events on failure should be enabled or disabled as appropriate.

CCE-23641-4
The "Turn off handwriting recognition error reporting" machine setting should be configured correctly.

CCE-23028-4
Auditing of "System: Other System Events" events on success should be enabled or disabled as appropriate.

CCE-23565-5
Auditing of "Object Access: Application Generated" events on success should be enabled or disabled as appropriate.

CCE-21959-2
The 'Microsoft network server: Server SPN target name validation level' setting should be configured correctly.

CCE-22548-2
The "Accounts: Guest account status" setting should be configured correctly.

CCE-22964-1
Configure registry policy processing

CCE-21562-4
The "MSS: (NoDefaultExempt) Configure IPSec exemptions for various types of network traffic." setting should be configured correctly.

CCE-23201-7
Windows Firewall: Domain: Allow unicast response

CCE-22658-9
The 'Network access: Restrict anonymous access to Named Pipes and Shares' setting should be configured correctly.

CCE-22843-7
Auditing of "Audit object access" events on sucess should be enabled or disabled as appropriate.

CCE-23103-5
The "MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing)" setting should be configured correctly.

CCE-22976-5
The 'Access this computer from the network' user right should be assigned to the appropriate accounts.

CCE-21256-3
Windows Firewall: Private: Logging: Log dropped packets

CCE-23021-9
Restrict Unauthenticated RPC clients

CCE-22267-9
Windows Firewall: Public: Logging: Name

CCE-21432-0
The 'Create global objects' user right should be assigned to the appropriate accounts.

CCE-21707-5
The "Microsoft Support Diagnostic Tool: Turn on MSDT interactive communication with Support Provider" machine setting should be configured correctly.

CCE-23251-2
Set Teredo State

CCE-21248-0
The "Turn off shell protocol protected mode" setting should be configured correctly.

CCE-21530-1
Windows Firewall: Public: Logging: Log successful connections

CCE-21990-7
The 'Change the system time' user right should be assigned to the appropriate accounts.

CCE-21816-4
Auditing of 'Privilege Use: Non Sensitive Privilege Use' events on success should be enabled or disabled as appropriate.

CCE-22617-5
The "MSS: (ScreenSaverGracePeriod) The time in seconds before the screen saver grace period expires (0 recommended)" setting should be configured correctly.

CCE-22921-1
The "Minimum password length" setting should be configured correctly.

CCE-21696-0
The "Do not allow passwords to be saved" machine setting should be configured correctly.

CCE-22210-9
Auditing of "Policy Change: Filtering Platform Policy Change" events on failure should be enabled or disabled as appropriate.

CCE-21949-3
Turn off the "Publish to Web" task for files and folders

CCE-23240-5
The 'Windows Firewall: Public: Apply local firewall rules' setting should be configured correctly.

CCE-22748-8
The "Do not adjust default option to 'Install Updates and Shut Down' in Shut Down Windows dialog box" setting should be configured correctly.

CCE-22519-3
The 'MSS: (TcpMaxDataRetransmissions IPv6) How many times unacknowledged data is retransmitted (3 recommended, 5 is default)' setting should be configured correctly.

CCE-21771-1
The "Always use classic logon" machine setting should be configured correctly.

CCE-22387-5
Windows Firewall: Domain: Inbound connections

CCE-22331-3
The "Set time limit for disconnected sessions" policy should be set correctly for Terminal Services.

CCE-21927-9
The 'Allow log on through Remote Desktop Services' user right should be assigned to the appropriate accounts.

CCE-22168-9
The 'Interactive logon: Smart card removal behavior' setting should be configured correctly.

CCE-22966-6
The "Configure minimum PIN length for startup" machine setting should be configured correctly.

CCE-21761-2
The "Disable Logging" setting should be configured correctly.

CCE-23120-9
Windows Firewall: Private: Logging: Log successful connections

CCE-21719-0
The "Do not send a Windows error report when a generic driver is installed on a device" machine setting should be configured correctly.

CCE-23264-5
The 'Accounts: Limit local account use of blank passwords to console logon only' setting should be configured correctly.

CCE-23241-3
This policy setting allows you to audit events generated by Kerberos authentication ticket-granting ticket (TGT) requests submitted for user accounts. If you configure this policy setting, an audit event is generated after a Kerberos authentication TGT is requested for a user account. Success audit ...

CCE-22157-2
The "Require a Password When a Computer Wakes (On Battery)" machine setting should be configured correctly.

CCE-23253-8
The 'Windows Firewall: Domain: Apply local connection security rules' setting should be configured correctly.

CCE-22351-1
Auditing of 'Account Logon: Other Account Logon Events' events on failure should be enabled or disabled as appropriate.

CCE-21785-1
The "Turn off Search Companion content file updates" machine setting should be configured correctly.

CCE-22890-8
Auditing of 'Account Management: User Account Management' events on success should be enabled or disabled as appropriate.

CCE-21807-3
Turn on Responder (RSPNDR) driver This policy setting changes the operational behavior of the Responder network protocol driver. The Responder allows a computer to participate in Link Layer Topology Discovery requests so that it can be discovered and located on the network. It also allows a comput ...

CCE-22581-3
Specify the maximum log file size (KB)

CCE-23381-7
The 'Act as part of the operating system' user right should be assigned to the appropriate accounts.

CCE-21883-4
The "Prevent creation of a system restore point during device activity that would normally prompt creation of a restore point" machine setting should be configured correctly.

CCE-22242-2
Control Event Log behavior when the log file reaches its maximum size

CCE-21687-9
The 'Log on as a batch job' user right should be assigned to the appropriate accounts.

CCE-22528-4
Specify the maximum log file size (KB)

CCE-23558-0
Auditing of 'System: System Integrity' events on failure should be enabled or disabled as appropriate.

CCE-21894-1
The 'Increase a process working set' user right should be assigned to the appropriate accounts.

CCE-22460-0
Windows Firewall: Public: Logging: Size limit (KB)

CCE-21675-4
The "Enumerate administrator accounts on elevation" setting should be enabled or disabled as appropriate.

CCE-21905-5
Auditing of 'Account Management: Computer Account Management' events on success should be enabled or disabled as appropriate.

CCE-22517-7
Windows Firewall: Public: Inbound connections

CCE-22156-4
Auditing of "Object Access: File System" events on failure should be enabled or disabled as appropriate.

CCE-22166-3
The 'Create symbolic links' user right should be assigned to the appropriate accounts.

CCE-22859-3
Auditing of "Logon/Logoff: Account Lockout" events on success should be enabled or disabled as appropriate.

CCE-23133-2
The 'Recovery console: Allow floppy copy and access to all drives and all folders' setting should be configured correctly.

CCE-22639-9
LAN Manager (LM) is a family of early Microsoft client/server software that allows users to link personal computers together on a single network. Network capabilities include transparent file and print sharing, user security features, and network administration tools. In Active Directory domains, th ...

CCE-21740-6
The 'Network access: Sharing and security model for local accounts' setting should be configured correctly.

CCE-21774-5
The 'Generate security audits' user right should be assigned to the appropriate accounts.

CCE-21895-8
The 'Profile single process' user right should be assigned to the appropriate accounts.

CCE-23391-6
The 'Require message integrity' option for the 'Network security: Minimum session security for NTLM SSP based (including secure RPC) servers' setting should be enabled or disabled as appropriate.

CCE-22847-8
The "Set client connection encryption level" machine setting should be configured correctly.

CCE-22057-4
The "Turn off handwriting personalization data sharing" setting should be configured correctly.

CCE-23145-6
The 'Modify firmware environment values' user right should be assigned to the appropriate accounts.

CCE-23058-1
The "MSS: (EnableICMPRedirect) Allow ICMP redirects to override OSPF generated routes" setting should be configured correctly.

CCE-23289-2
Auditing of "Audit policy change" events on sucess should be enabled or disabled as appropriate.

CCE-21982-4
The 'Debug programs' user right should be assigned to the appropriate accounts.

CCE-22082-2
The 'Create a token object' user right should be assigned to the appropriate accounts.

CCE-21534-3
This policy setting controls the behavior of all User Account Control (UAC) policy settings for the computer. If you change this policy setting, you must restart your computer. The options are: - Enabled: (Default) Admin Approval Mode is enabled. This policy must be enabled and related UAC pol ...

CCE-22029-3
The "Prevent device metadata retrieval from the Internet" machine setting should be configured correctly.

CCE-22311-5
The 'MSS: (Hidden) Hide Computer From the Browse List (not recommended except for highly secure environments)' setting should be configured correctly.

CCE-23063-1
Logon information is required to unlock a locked computer. For domain accounts, the Interactive logon: Require Domain Controller authentication to unlock workstation setting determines whether it is necessary to contact a domain controller to unlock a computer. If you enable this setting, a domain c ...

CCE-23450-0
Windows Firewall: Domain: Display a notification

CCE-21798-4
Auditing of 'Logon-Logoff: Special Logon' events on success should be enabled or disabled as appropriate.

CCE-22902-1
Auditing of 'Logon-Logoff: IPsec Extended Mode' events on success should be enabled or disabled as appropriate.

CCE-22466-7
This policy setting controls the behavior of application installation detection for the computer. The options are: - Enabled: (Default for home) When an application installation package is detected that requires elevation of privilege, the user is prompted to enter an administrative user name ...

CCE-23327-0
The 'MSS: (TcpMaxDataRetransmissions) How many times unacknowledged data is retransmitted (3 recommended, 5 is default)' setting should be configured correctly.

CCE-22553-2
The "User Account Control: Only elevate UIAccess applications that are installed in secure locations" setting should be configured correctly.

CCE-21391-8
The 'Shut down the system' user right should be assigned to the appropriate accounts.

CCE-22913-8
The 'Shutdown: Allow system to be shut down without having to log on' setting should be configured correctly.

CCE-23218-1
The 'Log on as a service' user right should be assigned to the appropriate accounts.

CCE-21840-4
The 'Deny access to this computer from the network' user right should be assigned to the appropriate accounts.

CCE-21788-5
The 'Manage auditing and security log' user right should be assigned to the appropriate accounts.

CCE-22028-5
Windows Firewall: Public: Display a notification

CCE-22686-0
The "Route all traffic through the internal network" setting should be configured correctly.

CCE-22126-7
The "User Account Control: Virtualize file and registry write failures to per-user locations" setting should be configured correctly.

CCE-21458-5
This policy setting controls whether User Interface Accessibility (UIAccess or UIA) programs can automatically disable the secure desktop for elevation prompts used by a standard user. - Enabled: UIA programs, including Windows Remote Assistance, automatically disable the secure desktop for elevati ...

CCE-22565-6
Auditing of "Logon/Logoff: Logoff" events on failure should be enabled or disabled as appropriate.

CCE-22421-2
The 'MSS: (KeepAliveTime) How often keep-alive packets are sent in milliseconds' setting should be configured correctly.

CCE-21545-9
Specify the maximum log file size (KB)

CCE-22577-1
Auditing of "Object Access: Filtering Platform Connection" events on failure should be enabled or disabled as appropriate.

CCE-23260-3
Configure Microsoft Active Protection Service Reporting

CCE-23604-2
Auditing of 'Detailed Tracking: Process Termination' events on success should be enabled or disabled as appropriate.

CCE-22936-9
The 'Deny log on as a batch job' user right should be assigned to the appropriate accounts.

CCE-22916-1
The "Turn off Internet File Association service" machine setting should be configured correctly.

CCE-23088-8
The "Do not allow drive redirection" setting should be configured correctly for Terminal Services.

CCE-21887-5
The 'Impersonate a client after authentication' user right should be assigned to the appropriate accounts.

CCE-23317-1
Configure Solicited Remote Assistance This policy setting allows you to turn on or turn off Solicited (Ask for) Remote Assistance on this computer. If you enable this policy setting, users on this computer can use email or file transfer to ask someone for help. Also, users can use instant messag ...

CCE-22453-5
The "Report when logon server was not available during user logon" machine setting should be configured correctly.

CCE-23505-1
Auditing of 'System: IPsec Driver' events on success should be enabled or disabled as appropriate.

CCE-22102-8
The 'Interactive logon: Number of previous logons to cache (in case domain controller is not available)' setting should be configured correctly.

CCE-21996-4
Auditing of "Object Access: Registry" events on failure should be enabled or disabled as appropriate.

CCE-22378-4
Auditing of 'Logon-Logoff: IPsec Main Mode' events on failure should be enabled or disabled as appropriate.

CCE-21875-0
The 'Prevent the computer from joining a homegroup' setting should be configured correctly.

CCE-23030-0
Windows Firewall: Domain: Logging: Log dropped packets

CCE-22320-6
The "Allow remote access to the Plug and Play interface" machine setting should be configured correctly.

CCE-23261-1
Allow NTLM to fall back to NULL session when used with LocalSystem. The default is TRUE up to Windows Vista and FALSE in Windows 7. Countermeasure: Configure Network security: Allow LocalSystem NULL session fallback to Disabled. Potential Impact: Any applications that require NULL ses ...

CCE-23076-3
Auditing of 'Detailed Tracking: DPAPI Activity' events on success should be enabled or disabled as appropriate.

CCE-23296-7
The 'Allow log on locally' user right should be assigned to the appropriate accounts.

CCE-22915-3
The 'Windows Firewall: Private: Apply local connection security rules' setting should be configured correctly.

CCE-23198-5
Audit Policy: Account Logon: Credential Validation This subcategory reports the results of validation tests on credentials submitted for a user account logon request. These events occur on the computer that is authoritative for the credentials. For domain accounts, the domain controller is authorit ...

CCE-22829-6
The 'Network Security: Allow PKU2U authentication requests to this computer to use online identities' setting should be configured correctly.

CCE-21414-8
The 'Minimum password age' setting should be configured correctly.

CCE-22310-7
The "Turn off Windows Update device driver searching" machine setting should be configured correctly.

CCE-22124-2
Auditing of 'Privilege Use: Other Privilege Use Events' events on failure should be enabled or disabled as appropriate.

CCE-22696-9
The "Turn on session logging" machine setting should be configured correctly.

CCE-22949-2
The "Turn Off the Display (On Battery)" machine setting should be configured correctly.

CCE-22003-8
Windows Firewall: Private: Allow unicast response

CCE-22465-9
Auditing of "Object Access: Handle Manipulation" events on failure should be enabled or disabled as appropriate.

CCE-23372-6
Turn on Mapper I/O (LLTDIO) driver This policy setting changes the operational behavior of the Mapper I/O network protocol driver. LLTDIO allows a computer to discover the topology of a network it's connected to. It also allows a computer to initiate Quality-of-Service requests such as bandwidth e ...

CCE-22783-5
This policy setting determines the strength of the default discretionary access control list (DACL) for objects. The setting helps secure objects that can be located and shared among processes and its default configuration strengthens the DACL, because it allows users who are not administrators to r ...

CCE-21940-2
The 'MSS: (NoNameReleaseOnDemand) Allow the computer to ignore NetBIOS name release requests except from WINS servers' setting should be configured correctly.

CCE-22575-5
The "Prevent Windows from sending an error report when a device driver requests additional software during installation" machine setting should be configured correctly.

CCE-23442-7
The 'Restore files and directories' user right should be assigned to the appropriate accounts.

CCE-23181-1
The 'Load and unload device drivers' user right should be assigned to the appropriate accounts.

CCE-23193-6
The "Devices: Allowed to format and eject removable media" setting should be configured correctly.

CCE-23314-8
The 'Back up files and directories' user right should be assigned to the appropriate accounts.

CCE-21703-4
The 'User Account Control: Behavior of the elevation prompt for standard users' setting should be configured correctly.

CCE-22141-6
The 'Create permanent shared objects' user right should be assigned to the appropriate accounts.

CCE-23258-7
The 'Enable computer and user accounts to be trusted for delegation' user right should be assigned to the appropriate accounts.

CCE-23549-9
The "Network security: Force logoff when logon hours expire" setting should be configured correctly.

CCE-22243-0
This policy setting controls the behavior of the elevation prompt for administrators. The options are: - Elevate without prompting: Allows privileged accounts to perform an operation that requires elevation without requiring consent or credentials. Note: Use this option only in the most co ...

CCE-22472-5
The 'Replace a process level token' user right should be assigned to the appropriate accounts.

CCE-22816-3
The 'Deny log on locally' user right should be assigned to the appropriate accounts.

CCE-21994-9
The 'Lock pages in memory' user right should be assigned to the appropriate accounts.

CCE-22116-8
The "Always install with elevated privileges" machine setting should be configured correctly.

CCE-22904-7
The 'Perform volume maintenance tasks' user right should be assigned to the appropriate accounts.

CCE-22552-4
The "Network security: Do not store LAN Manager hash value on next password change" setting should be configured correctly.

CCE-23007-8
The 'Domain member: Require strong (Windows 2000 or later) session key' setting should be configured correctly.

CCE-22428-7
The 'Microsoft network client: Digitally sign communications (always)' setting should be configured correctly.

CCE-22538-3
This policy setting determines if the server side SMB service is able to sign SMB packets if it is requested to do so by a client that attempts to establish a connection. If no signing request comes from the client, a connection will be allowed without a signature if the Microsoft network server: Di ...

CCE-22386-7
The "Domain member: Digitally sign secure channel data (when possible)" setting should be configured correctly.

CCE-22749-6
The 'Require message integrity' option for the 'Network security: Minimum session security for NTLM SSP based (including secure RPC) clients' setting should be enabled or disabled as appropriate.

CCE-21863-6
The "Microsoft network client: Digitally sign communications (if server agrees)" setting should be configured correctly.

CCE-22707-4
The 'Domain member: Digitally encrypt or sign secure channel data (always)' setting should be configured correctly.

CCE-22447-7
The 'Network access: Let Everyone permissions apply to anonymous users' setting should be configured correctly.

CCE-21504-6
The 'Network access: Remotely accessible registry paths' setting should be configured correctly.

CCE-22786-8
The 'System objects: Require case insensitivity for non-Windows subsystems' setting should be configured correctly.

CCE-22097-0
The "Accounts: Rename administrator account" setting should be configured correctly.

CCE-23597-8
The 'Network access: Named Pipes that can be accessed anonymously' setting should be configured correctly.

CCE-22096-2
The "No auto-restart with logged on users for scheduled automatic updates installations" machine setting should be configured correctly.

CCE-22973-2
The "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" setting should be configured correctly.

CCE-23522-6
The 'Interactive logon: Do not require CTRL+ALT+DEL' setting should be configured correctly.

CCE-21399-1
The "Accounts: Rename guest account" setting should be configured correctly.

CCE-22405-5
The "Microsoft network client: Send unencrypted password to third-party SMB servers" setting should be configured correctly.

CCE-21714-1
Windows Firewall: Private: Firewall state

CCE-23400-5
The 'Network security: LDAP client signing requirements' setting should be configured correctly.

CCE-23090-4
Windows Firewall: Domain: Firewall state

CCE-23257-9
The 'Network access: Shares that can be accessed anonymously' setting should be configured correctly.

CCE-22977-3
The 'Network access: Remotely accessible registry paths and sub-paths' setting should be configured correctly.

CCE-21892-5
The "Interactive logon: Prompt user to change password before expiration" setting should be configured correctly.

CCE-22615-9
The "Interactive logon: Do not display last user name" setting should be configured correctly.

CCE-21359-5
Windows Firewall: Public: Firewall state

CCE-22541-7
The 'Reset account lockout counter after' setting should be configured correctly.

CCE-21621-8
The 'Domain member: Maximum machine account password age' setting should be configured correctly.

CCE-21546-7
The "Network access: Do not allow anonymous enumeration of SAM accounts and shares" setting should be configured correctly.

CCE-21523-6
The 'Microsoft network server: Amount of idle time required before suspending session' setting should be configured correctly.

CCE-22585-4
The "Network access: Do not allow anonymous enumeration of SAM accounts and shares" setting should be configured correctly.

CCE-21766-1
Enable screen saver

CCE-21525-1
Screen saver timeout

CCE-21963-4
The "Password protect the screen saver" setting should be configured correctly for the default user.

CPE    1
cpe:/o:microsoft:windows_8
*XCCDF
xccdf_org.secpod_benchmark_PCI_Windows_8
OVAL    299
oval:org.secpod.oval:def:18107
oval:org.secpod.oval:def:18079
oval:org.secpod.oval:def:18178
oval:org.secpod.oval:def:18086
...

© SecPod Technologies